Model DT-5 Air Press

This bench-top air press is equipped with electronic digital dwell timers and parts counter! The model DT-5 shown above (in different view angles) is capable of up to 510 lbs. of force (Higher/Lower force models also available). These modular designed presses are also available without the base (LB Models) for use in custom systems. Actuator/thruster (LT Models) available without stand or base for remote/tight locations.

Information:

84 Research Drive Milford, CT 06460
Tel: (203) 878-9321
Fax: (203) 878-6786
email: airpress@sonitek.com

Specifications:

Model	DT-5
Power requirements:	120V or 240V
Current draw:	Less than 1 amp
Pneumatic requirements:	Clean Dry Air @ 100 PSIG (690 kPa)
Maximum Force on part @ 100 PSIG	510 lbs (231.3 kg)
Air Consumption in CFM at 5 CPM:	.88 CFM at full stroke of 4.9”
Stroke Length	4.9” (125mm)
Head Height Clearance	0-22” (0-559)
Throat Depth	6” (152mm)
Weight	155 lbs (70 kg)
Ambient Temperature	41-122 F (5-50C)

Available Options:

Velocity/Depth Control (VCU Unit)

Velocity and Depth Control Unit (VCU) provides more precise control for head speed and final stroke distance. Two models available with long and short stroke options.